The easy to use 403 Nailer is the most versatile flooring nailer on the market and comes ready to angle nail 3/8/, 1/2, 5/8, 3/4 and 33/32 In. T & G flooring and will face nail to handle the first and last few strips of flooring. An accessory Nailer Shoe is available for metric flooring including Bamboo ( sold separately) PNI's Preferred-Seating System uses an exclusive ratcheting ram to ensure nails are properly seated to prevent squeaks in the floor. The nail's wide head and grapple barb design provides superior holding power and the patented anti-split nail cuts through wood without splitting your floor. Three lengths of nails will insure you have the right fastener to match up to your sub floor. Porta-Nailers are world-renowned by Pro and DIY Users and are designed to protect pre finished floors and provide the tightest floor possible

Manta III Core Drills features a precision rack and pinion carriage with maintenance-free, double-sealed bearings and a 2 1/2 inch square steel column with ceiling jack. All Manta drill rigs are engineered for positive anchoring to allow for both vertical and horizontal drilling. The feed handle can be mounted on either side for easy drilling close to walls and columns. The lightweight cast-aluminum base and built-in wheels make the Manta line easy to move and maneuver. The carriage assembly easily detaches from column for transport. Control box comes standard with amp meter and a conveniently located power switch.

Compact, lightweight and engineered for maneuverability and reliability, the MK-CX-3 (Honda) can be used for wet or dry cutting. A corrosion resistant, cast-aluminum blade guard that mounts on either left- or right-hand side of saw enables cuts within 1" of wall or curb. Built-in water distribution system supplies water to both sides of blade. The CX-3 features a Poly V-belt for positive power transmission with a sturdy single piece steel motor mount weldment and a 1" diameter blade shaft with self aligning bearings to minimize vibration. The hinged blade guard provides easy access for blade changes and inspection and a folding handle bar for compact transport

Mi-T-M's hand carry electric, single stage 5-gallon air compressors make your jobs easier and more efficient by supplying the extra power you need. The compact & portable twin tank design makes this electric model perfect for remote jobsites.

Touch-ups or complete job requirement, the 1.5 cu/ft M-Series Blast Pot is up for the task. With a moisture separator as part of the piping, you can count on dryer abrasive to reduce your downtime. Flexible pneumatic tires and a tilt-and-go handle make this machine highly mobile. Included is the KwikFire 153 Remote Control Handle, built in nozzle holder and proven 2-Hole Jr. Integrator MixingValve. Features•durable powder-coated finish •Compact & Portable Design •Simple to Operate & Maintain •Two Hole Junior Metering Valve provides precise metering capabilities
•Dish head for hassle free filling •Triangle handle for easy pressurization •Built-in moisture separator & pressure gauge•KwikFire 153 Remote Control Swicth offers starting & stopping control and a nozzle holder, all-in-one (optional)
•125 psi operating pressure

Our Marco 3.5 cu/ft S-Series Blast Pot will make your job easier. The lip is only 42” high (total height is 48”), allowing for easy loading of bagged abrasive into the blast machine. With a 90 degree bottom head and 150 psi working pressure, this blast pot can handle almost any job. Heavy-duty wheels and lifting eyes, mounted on the vessel, make this unit extremely portable on the job site. The remote control system is mounted on the back, which protects the remote control system and creates a compact design. A width of only 21” allows the blast pot to fit through standard doorways

Marco Ceramic Nozzles are designed for use with the Kwikfire 153 Remote Control Handle and the Marco Professional Series hose ends. Type 1 nozzles have a tapered body and a straight bore and are often used for detail work

Marco Ceramic Nozzles are designed for use with the Kwikfire 153 Remote Control Handle. Type 1 nozzles have a tapered body and a straight bore and are often used for detail work

These versatile heaters, used by many to heat tents for events, are also great for small or large work spaces, renovation jobs, and any application where an enclosed flame or low noise is important. Premier heaters can be used to provide heat or simple air circulation inside, or be ducted in from the outside

JET 30" Black Head Center-Cut Bolt Cutter is specially designed to produce superior cutting force. The high-carbon alloy tool steel jaws are ideally suited to cutting rebar, medium tensile and soft bolts, rods, rivets, bars and chains with a maximum hardness of HRC-40. Designed with safety in mind, these bolt cutters exceed Federal Specifications and are sure to give you the quality and performance you've come to expect from JET

JET 5/8" Capacity REBAR CUTTER BENDER -- Can be bolted to floor or board for easy one-hand operation. Patented design uses needle bearing for easy cutting. Cuts and bends grade 60 rebar. 5/8" Capacity; 52" length. Jaws are made of high-carbon alloy tool steel, HRC-48. See True Value #724593

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards. See True Value # 724664

JET 27" x 48" Forks, 6000-LB Capacity 

JET 22-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

JET 15-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional. See True Value # 724607

deal for construction firms and all types of contractors, the Genie® Superlift Contractor® SLC™-18 lift can be easily operated by one person to lift, lower and move heavy loads. The captive stabilizer with patented “locking system” comes standard to provide additional lateral support for heavy loads.

Ideal for maneuvering in tight spaces, the quiet, zero emission electric Genie® GS™-2632 slab scissor lift is excellent for indoor and outdoor construction, maintenance and installation applications on firm, level surfaces.

Overview

• Large platform workspace with 36-in (.9 m) roll-out platform extension
• High-angle steering for excellent maneuverability
• Folding rails with half-height swing gate come standard
• Emergency stop at both platform and ground controls for added safety

The Spin-Drive is a lightweight easy-to-operate manual drain cleaner for 2” through 4” drain lines. A comfortable metal handle on the crank turns the cage smoothly on self-aligning oilite bearings mounted on the front and rear of frame. A convenient carrying handle is mounted on the cage for easier portability. Equipped with Flexicore wire rope center cables, assuring you long life, as well as the strength and flexibility to do a good cleaning job.

We’ve miniaturized our big machine power cable feed and put it on the Super-Vee to give you feeding speed and convenience you haven’t seen before in a hand-held power drain cleaner.

In tight or awkward places, the Power-Vee is like having an extra hand.

To feed the cable just start the Power-Vee and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever.

Here’s a compact, light weight tool for quickly opening clogged sinks, toilets and tubs. It handles rust, grease, sediment, and scale in lines up through 4″ in diameter.

The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up stoppage. It’s particularly useful when the stoppage is on the far side of a drum trap or series of tight bends, since the shock wave can travel around bends without losing its force.

The Ram has a self-contained pump and pressure gauge, so you can hit the stoppage with just the right amount of force. You get instant impact with no build-up of pressure in the plumbing system. The force is transmitted through water, so it’s not affected by stacks or vents.

A plumbing professional's sewer snake is made use of to clear clogs by working the flexible wire like tool into the drain. 

General Wire MR-300 Mini-Rooter 1/3 HP MotorGeneral Wire MR-300 Mini-Rooter 1/3 HP Motor Features: Forward-Off-Reverse switch Spring-loaded mounting for proper belt tension

The heavy-duty six foot Teletube Closet Auger 2 m (Cat # T6FL) lets you clear stoppages just beyond the bowl. No need to lift the bowl, because the Teletube has an extra three feet 1 m telescoped inside a guide tube until you need it. After you’ve worked the first three feet into the bowl, you can go three feet farther simply by pressing a button and pulling the crank handle.

The outer steel tube is a big 1-1/8” in diameter. The hexagonal guide tube is even tougher than the steel rod we use in our 3FL closet augers. The Teletube weighs just a little more than a 3FL too. Other features include a vinyl bowl guard, vinyl grip handle and turning handle, and a “Grip Clip” for securing the cable.

The Easy Rooter is a tough, easy-to-use machine. It has a rugged powder coated steel frame with special “roll bars” to protect the motor and heavy-duty roller bearings in the cage for longer life and greater motor efficiency on long runs. The large cage holds 100 feet of 3/4″ or 5/8″ Flexicore® cable to clear tree roots and other difficult obstructions in 3” to 10” drain lines.

A Quick-Grip™ chuck secures the cable during operation. With a just a quarter turn, the chuck tightens firmly on the cable to secure it while the Easy Rooter drives the cable into the line. Then, can be released just as quickly to pull more cable from the drum. It’s faster and easier to use than a thumb screw.

The Mini-Rooter XP gives you extra portability because 8″ semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps.

The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4″ to 4″ in diameter with just one machine. The drum easily holds 75 feet of 3/8″ or 1/2″ cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum you can handle smaller drain lines.