The two stage wheelbarrow style 8-gallon air compressor is ideal for both contractors and remodelers where a higher CFM and air pressure is a must. Use it to power a multitude of air tools such as air hammers and impact wrenches.

Compressor Pump: Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator

Frame: Powder coated 8-gallon twin tank receivers · 3/16-inch base plate to reduce vibration · 14-gauge powder coated two-piece belt guard · 10-inch flat-free tires

Components: Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16 1/2-inch fly · Quality pilot valve unloader

*Equipped with 150-PSI maximum rated regulator

The machine is designed for sucking and separating dry, non-com- bustible dust with an explosion limit value of >0.1mg/m3

The motor is started by the switch. Dust-laden air is then sucked through the inlet valve at high speed via the suction hose. The air is slowed down by the cyclone and coarse dust particles are separated out, partly by centrifugal force and partly be gravity. Air and finer particles then pass through the main filter where separation is made. The machine is designed for filter cleaning by reverse air pulse.

The separated dust accumulates in the cyclone until the machine is switched off, when it drops through the bottom flap into the plastic bag. 

Now there is an easier way to remove floor coverings. The Stow SFCS16 removes direct glue-down carpet, hardwood flooring, linoleum, non-slip floor coverings, vinyl tile or any other adhesive, cement and mastic.

The 5700 is the cornerstone of National's scraper fleet. This All Day Battery Ride-On machine powers through an average eight hour day without requiring a battery recharge or electrical cord assistance. The onboard, built-in charging system has the versatility to plug into any outlet. There are no harmful fumes or hazardous bi-products, with the weights out it will fit in residential elevators and it is narrow enough to fit in a 34 inch door; this machine can operate on almost any jobsite!

The 14" Dual Motor Upright Vacuum offers cleaning efficiency with the versatility of off-floor cleaning. These vacuums have an enclosed bag filtration system that does not allow dust to escape. 

Clean carpet, hard floor, ceramic, VCT, linoleum, marble, stone and more with one machine!

The Multiwash Scrubber is perfect for someone who needs an quick and easy solution for multiple floor types. With 4 brushes to choose from, nearly every hard floor care job can be completed with the Multiwash Scrubber.

The Ultra Speed Burnisher series is ideal for hospitals, schools and areas requiring dust-free, quiet and fume-free operation, while producing the brilliant high-gloss shine.

The new C2K Series brings new meaning to quality, performance, and safety. A wide choice of horsepower, sizes, speeds, and accessories provides the opportunity to fulfill the needs of any application for a single disk floor buffer, polisher and scrubber. 

The amazing EDIC FiveStar is a compact, self-contained extractor with powerful brush agitation to clean carpets. It weighs only 40 pounds, so it's light enough for anyone to handle, plus the compact body design and fold-down handle make it a breeze to transport, store, and operate.

Backed by the Carpet and Rug Institute's gold seal of performance, the PFX1085EAW uses pioneering innovation in carpet cleaning to deliver deep cleaning with hot water and 500 PSI! The result of this state-of-the-art engineering is an extractor with less amp draw, a cooler running motor, and remarkable water recovery. 

Designed for light construction work – leveling and turning angles.

• 1/4-inch at 100-feet leveling accuracy
• Up-to 200-foot range
• Horizontal Circle– Graduated to single degrees and reads by vernier direct to 1/4 degree (15 minutes)
• Horizontal Lock and Tangent Screw– Provides precise movement control
• Built-in Sunshade – For clearer sightings
• Leveling Vial – Top mounted for effortless viewing

A great value for a 7" tile saw that can handle the small to medium jobs. This saw has many features of more expensive tile saws like a belt-driven1 HP motorfor maximum motor-to-blade power. A sturdy aluminum cutting table with anti-skid top for keeping material in place while cutting, and a light-weight water pan for easy cleaning and/or single operator use getting on and off the site. 

The new TS 760 STIHL Cutquik® cut-off machine features a magnesium guard making the machine a full 0.7 pounds lighter than the previous model. The TS 760 features a 16” cutting wheel, the largest size we offer in a handheld design. When used with the optional STIHL Cutquik® cart, the TS 760 is an excellent alternative to conventional walk behinds because it can be used as a handheld or quickly snapped into our cart for long, straight, controlled cuts. It’s also fuel efficient, with enough power to cut through asphalt, concrete, rebar, iron and steel with ease. 

Small to medium contractor work demands performance with an economical solution. The PC-13 brings the contractor the ideal saw with a heavy-duty box frame that resists bending and supported with the high-performing Honda 13HP engine. The heavy frame also provides a straighter cut. Changing or adjusting belts is simple with the single screw tensioner.

Moves 1320 gallons per hour.

• Heavy duty cast aluminum pump is easy to operate
• Includes garden hose adapter
• 1-1/4" Discharge pipe size
• 8' Power cord length

KEY FEATURES

The jet pipe is used with our 2" jet pump to jet pilings.

The PTS 4V self-priming centrifugal trash pump can move larger amounts of water for a variety of job sites. With the ability to pump up to 705 gpm (2667 l/min) and solids up to 2-inches (50 mm), this pump is ideal for dewatering excavations, utility vaults, mining work, swimming pools, lakes and barge holds or wherever there is unwanted water. With the radial flow design, quality components and built-in contractor friendly features, this trash pump has redefined the quality and durability standards of self-priming, centrifugal trash pumps.

• 21.1 cc engine with Pro-Fire electronic ignition
• Cast iron volute for added durability
• Comes complete with intake hose and filter
• Discharges up to 28 gal. Per min and 1,680 gal. Per hr
• Maximum suction lift of 24.6'
• Total head discharge up to 70.4'

CONCRETE TAMPER
Ergonomically designed
Built to take the pounding and stay flat
Tamping will settle the larger aggregate, consolidating the slab for increased strength
It brings the fine material to the surface for a fast, easy finish

A concrete bull float is a tool used to finish a concrete surface by making it smooth. A float is used after the surface has been made level using a screed.

Available in square or round edge.

Forced air torpedo heater. Perfect for those cold days in shop.

Features & Benefits：

Perfect for that small tile job