The Bosch Combination Hammer has an SDS-MAX drive system and powerful 14 Amp motor for excellent drilling performance. With its combination dual-mode selector, you have 2 modes of operation: rotary hammer and hammer only. For even more user-friendly features, you can use the Vario-Lock positioning system to rotate and lock the hammer chisel in 12 different positions to optimize your working angle.

The Makita 20 lb. Demolition Hammer accepts SDS max bits and provides a hard hitting 18.8 lbs. of impact energy. The constant speed control applies additional power to the motor to maintain speed under load. The soft start feature suppresses start up reaction for more control and better accuracy while the variable speed function enables the user to match the speed to the application. The 12 bit angle settings allow the bit to be set at different positions for operating convenience.

• POWER : 14 AMP motor delivers 950 - 1,900 BPM and 25.5 J/ 18.8 ft.lbs. of impact energy
• CONTROL : Variable speed control dial to match the speed to application.
• PERFORMANCE : Constant speed control to maintain speed under load
• DESIGN : L.E. D. service lights notify user before brushes need to be replaced, switch failure or cord damage
• INCLUDES : Bull point, bit grease and case

The Bosch 11321EVS SDS-max® Demolition Hammer is a 13.0 Amp tool that gets the job done, delivering 6.1 Ft.-Lbs. of impact energy and a max of 2,900 BPM. Yet it weighs only 13.7 Lbs. for outstanding power-to-weight performance, and it has Vibration Control for all-day comfort. This hammer provides Constant Response circuitry for constant power under load, as well as smooth starts and overload protection. Vario-Lock positioning permits rotating and locking the chisel with precision, while the Auto-Max™ variable-speed dial permits the operator to match power to application – from 1,300 BPM to 2,900 BPM. The SDS-max® chuck system provides tool-free bit changes, while the Service Minderlight indicates that maintenance is needed. And the demo hammer has a 360° rotating auxiliary handle and a padded rear handle for extra operator comfort.

The Bosch Combination Hammer has an SDS-MAX drive system and powerful 14 Amp motor for excellent drilling performance. With its combination dual-mode selector, you have 2 modes of operation: rotary hammer and hammer only. For even more user-friendly features, you can use the Vario-Lock positioning system to rotate and lock the hammer chisel in 12 different positions to optimize your working angle.

• 8.8 Amp motor, variable speed 180-360 RPM, 1600-3200 BPM
• Constant-ResponseTM Circuitry - Provides soft-start and constantly monitors and adjust power to maintain desired RPM and impact force for consistent performance and control
• Electro-pneumatic impact system - Piston hit air column to minimize vibration, yet deliver maximum impact force
• SDS-max bit system - Tool-less bit changes, with automatic bit locking, dust protection and efficient impact energy transfer rate
• 2 Modes of operation - Quickly converts from rotation with hammering to hammer only

The Bosch 1169VSR dual-torque drill provides the maximum versatility of operation by matching the speed and torque with the job. The tool features a speed selector dial that lets you match speed to the application.

The new 70 lb. AVT® Breaker Hammer is engineered to hit like an air hammer, but with less noise and vibration. It has a powerful 15 AMP motor that delivers a full 53.9 ft.lbs. (73.8 Joules) of impact energy, so contractors get hard-hitting performance. Users also benefit from less noise and lower vibration than an air hammer, and zero hassle with an air hose and compressor. The HM1812 features the latest Advanced AVT® Technology, a synchronized three-component system that more effectively reduces vibration. The internal mechanical counterbalance system, vibration-absorbing housing, and fixed movement handles are engineered for significantly less vibration during concrete breaking applications.

Tough on concrete, not on you. Makita’s hard-hitting HM1810 60 lb. Breaker Hammer is equipped with Anti-Vibration Technology (AVT), an exclusive counterbalance system that reduces vibration. The result is more efficient hitting on the concrete and less vibration in the tool – and the tool user.

15 AMP Power

The HM1810 with AVT® is engineered to be the most efficient breaker hammer In its class with a 15 AMP motor that provides 1,110 BPM and 63 joules of impact energy with less vibration. In addition, it has an automatic brush cut-off system that protects the commutator, and a warning indicator lamp for longer tool life.

More Work, Less Vibration

The HM1810 is equipped with AVT, Makita’s exclusive counterbalance system that reduces vibration for more efficient hitting power. The breaker hammer also has lower noise at just 107dB. The HM1810 weighs 71.3 lbs. and has large side handles with an easy-to-operate switch control for better control and comfort. For added conv

The JSG-3328 JET pistol grip needle scaler has a heavy-duty pistol grip design for better control and ease of operation. It comes with 14 4mm needles standard and operates at 4,500 blows per minute with a 5/8-Inch stroke. The tool requires 90 psi and will take 8 cfm to operate properly.

The Grip-Rite GRTCN90 coil framing nailer is durable yet lightweight, weighing in at only 6.6 pounds. The selectable trigger allows workers to choose between bump and sequential fire. A rotating belt hook and durable molded rubber grip allow for comfort and ease of use. This tool shoots 15 Degrees wire weld or plastic sheet coil framing nails ranging in size from 1-3/4-Inch to 3-1/2-Inch. Applications include framing, sheathing, decking, sub-floor, decks, pallets and crates.

This professional quality log splitter is designed for tough applications in both vertical and horizontal positions. An attractive powder coated finish provides the finest protection available, and BRAVE’s rigid quality control and component testing help ensure years of productive, reliable service.

Product Description

BravePro forward plate compactors are ideal for all general compacting applications - curbs, gutters, around tanks, forms, columns, footings, landscaping, paving blocks, drainage ditches, and light to medium road repair work.

An ROI-driven solution, the Night-Lite™ V-Series® is built with the efficiency, durability and performance you demand. This unit will run from 73 to 155 hours between refueling with metal halide or LED respectively, and has a convenient fuel fill neck for quick refueling. Plus, it offers 542,000 total lumens from the four metal halide light fixtures and minimized freight costs by fitting up to twenty units on a flatbed trailer.

Skyjack electric scissor lifts have been recognized as an industry leader for over a decade. Our DC scissor lifts are ideal for indoor work where accuracy and precision turns around sensitive material is critical.

The next generation of 13HP saws. Features shock-absorbing handle bars. The new sleek design of the water tank, with increased capacity. And, a newly-designed belt tensioning system helps keep the saw cutting tried and true. All these features, coupled with the Honda 13 HP engine, makes the C1318P the premiere choice for rental and service work.

The Cat E2 Series Mini Hydraulic Excavators are designed to carry on the solid performance of their E Series predecessors, while adding even greater value for the customer. The new High Definition Hydraulic (HDH) System, redesigned operator station and enhanced digital control panel specially designed for Cat Mini Excavators – COMPASS (Complete, Operation, Maintenance, Performance And Security System) – are all standard features that improve performance and increase value.

The Cat 259D Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, stability and speed to work in a wide range of applications and underfoot conditions.

Detour sign- word only. Does not include barricade. 

Makita has an expanding line of laser instruments engineered for increased accuracy and productivity. The 12V max CXT® Self-Leveling Multi-Line Green Laseris a highly precise, highly visible and durable laser for leveling, aligning, plumbing, and squaring. The green beam laser technology provides increased visibility in bright light job site environments, and fast self-leveling line stability is achieved in 3 seconds for increased productivity.

Durability features include highly protected laser windows that are recessed into the housing for increased durability, pendulum lock for added protection of laser diode during transport and storage, and a rubberized carrying handle designed to position out of the way while operating and provide additional stand-up stability in handle down position. It has dust and water resistance with IP 54 rating for increased durability in harsh job site environments.

For over 40 years, Kubota has continually developed products that meet or exceed the varying demands of valued customers in North America. The all-new MX Series is the latest in Kubota’s ongoing commitment to offering unmatched tractor innovation and quality. The new MX Series tractors can tackle just about any job that comes their way. Their ideal size make them versatile for a variety of work sites and applications.

The Makita 1-1/4 HP Compact Router (model RT0701C) delivers performance and precision in a compact design. With a full 1-1/4 maximum horsepower, the RT0701C is engineered for a range of precision routing applications.

The RT0701C has a powerful 1-1/4 HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application.

The RT0701C is engineered for precision and includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal/installation, with a high-visibility base design for improved handling and performance.

Makita’s Top Handle Jig Saw, Model 4350FCT, combines power and superior feel with substantially less vibration and noise for improved cutting performance. It is ideal for woodworkers, cabinet makers, remodelers, and general contractors seeking a best-in-class top handle jig saw.

The 4350FCT has three orbital settings plus straight cutting, powered by a Makita-built 6.3 AMP motor. The electronic variable speed control (800 – 2,800 SPM) is engineered to maintain consistent speed throughout the cut for superior results. The motor is dynamically balanced for 40% less tool vibration and lower noise than competitive models. The 4350FCT has a 1-inch length of stroke, with a wood cutting capacity of 5-5/16 inches at 90° and a steel cutting capacity of 3/8 inches at 90°.